Repairs
Repair & Maintenance
Households notice the small changes first: a new noise, a slower close, a light showing under the bottom edge. Those observations are the starting point for most of the work in this group, and they are worth acting on.
Which one do I need?
- Your toddler has discovered the wall button.Garage Door Safety Inspection
- The door lands with a thud you can feel through the kitchen floor, and sometimes it bounces back up a few centimetres before settling.Garage Door Tune-Up
- You tapped the door with the bumper while backing in, barely a nudge, and now the bottom corner has swung inward.Off-Track Garage Door Reset
- A stray ball went through one of the window panes in the top section.Garage Door Panel Replacement
- With the door closed and the lights off, a bright line of daylight runs along the floor from one side to the other.Garage Door Bottom Seal Replacement
- Dry leaves keep appearing in the same corner inside the garage, and this fall there were mouse droppings along the wall beside the door.Garage Door Perimeter Weatherstrip
Repair & Maintenance
Inspection, adjustment, sealing, and section-level repairs.
Garage Door Safety Inspection
Putting a name to the door and the opener
The first thing the technician does is read labels. The door's model tag is usually on the inside of an end stile or the bottom section, and the opener's is on the motor head; between them they tell the technician the door's weight class, the lift hardware it was built with and the exact test procedure the opener maker publishes. That matters because reversal settings, photo-eye mounting heights and force limits differ between models and generations.
Writing the model numbers down at the start also means the report is tied to a specific door, so the next person to look at it, years from now, starts from the same page.