Springs
Springs & Hardware
A well-set spring system means the door will stay wherever you leave it, half open included. That is the standard we work to on every spring and cable job.
Which one do I need?
- Every morning the door announces itself: a rattle on the way up, a grinding squeal on the way down, loud enough that the neighbours know when you leave.Garage Door Roller Replacement
- The roller at the top of the second panel is leaning outward and only half of the wheel is still in the track.Garage Door Hinge Replacement
- Halfway up, the door lurches and one roller rides onto the lip of the channel.Garage Door Track Repair or Replacement
- Standing inside with the door closed, you notice the cable on the right side near the floor has gone fuzzy.Garage Door Cable Replacement
- After pulling the red release cord, you tried lifting the door yourself and it would barely leave the floor.Torsion Spring Replacement
- You pulled the red cord to open the door during a power cut and it barely moved.Extension Spring Replacement
Springs & Hardware
Counterbalance, track, roller, cable, and hinge work.
Garage Door Roller Replacement
Every roller, one by one
Each roller is examined in place before anything is unbolted. The wheel is checked for flat spots, for chips and cracks in a nylon tire, or for a plastic wheel worn to an oval; the stem is checked for bends and for how much it wobbles in its hinge; the bearings are spun by hand for grit, roughness or the loose rattle of balls that have pitted their race. The technician also notes whether each wheel sits centred in the track or has been riding on one lip.
Ten or twelve wheels take only minutes to read this way, and the pattern of wear across them tells the story of the door as a whole.